Mixing and usage requirements for Neptune’s Harvest Fish, Fish/Seaweed Blend and Seaweed Fertilizers:

 

Products must be stirred well

Products WILL separate, so stirring well is very important!

Pumps, spray equipment and/or drip lines must be cleaned out after every use

·         To assure that your equipment works its best and lasts as long as possible, it is extremely important to flush your equipment with clean water after using our products. It will also help to prevent any clogging issues due to oily buildup, and corrosion due to the phosphoric acid we use to stabilize the Fish.

Do not store diluted

·         Once you have mixed our products with water, they must be used up the same day. We bring our Fish products down to a pH of 3.5 in order to keep them from spoiling. Once water has been added, the pH goes up so the plant can accept it. If you do store it diluted, it will still work, but will become malodorous.

Mix with enough water before spraying

·         Each gallon should be mixed with a minimum of 10 gallons of water. You can add more water, but do not add less unless you find a way to raise the pH. Our Seaweed Extract is a good way to do that. We recommended a pH meter when in doubt. We have had ranchers spray it at 1 gallon of Fish, to 3 gallons of water, on hay and pasture, without any problems. Some crops can handle low pH’s.

If mixing with other inputs

·         If you are mixing the Fish with other inputs, always add the Fish to the tank last. In almost all cases you can cut back on the other inputs by 25% when spraying with the Fish.

 

Please feel free to call or e-mail us anytime if you have any questions or need additional information – phone: (800) 259-4769. 

 

Additional information, including OMRI Sheets, Analysis Sheets, etc… can be found on the ‘Information for Farmers’ section of our website. www.neptunesharvest.com.